Mini Blind Contract Responsiblities
It is the responsibility of the contractor to call on any state agency, institution, public school, university, or participating non-state agency to discuss requirements and upon written request, take and guarantee measurements. Contractor is obligated to respond to such requests. Contractors responding to telephone requests for measurements will do so at their own risk. The State will not be responsible for misunderstandings resulting from oral requests.
What are Smart Windows?
“Smart Windows That Don’t Need discount blinds, Ultra-durable Sheet Metal Presses and an Ethanol Process to Improve Market for Corn
Energy Department Awards $4.4 Million to Develop Energy-Efficient TechnologiesTo improve energy efficiency in buildings and in manufacturing, the Department of Energy (DOE) announced awards today totaling $4.4 million to advance energy efficient, environmentally clean production and building technologies including all types of existing window blinds or shade technologies.
Mini window blinds to be Furnished and Installed
If circumstances beyond the control of the contractor result in a late delivery, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator. Delivery/Installation: This contract provides for custom blinds to be furnished only or furnished and installed. In instances where furnish and install is requested, discount blinds are to be delivered and installed within a guaranteed delivery and installation schedule.
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing window treatments are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of window coverings may be off-premises, at the direction of the user.
14.B. Labels
All window treatments sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs window coverings, the date of installation must be shown in place of the shipment date. Failure to identify window treatments will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
What are Exterior window blinds?
Exterior roller custom blinds are usually made of wood, steel, aluminum, or vinyl. They’re mounted above the window. Side channels guide them as they’re lowered and raised. When you lower these discount blinds completely, their slats meet and provide shade. If partially raised, the window blinds allow some air and daylight to enter through windows.
Use the invited format whenever an employer has asked for a cover letter. This is often in response to a classified ad or publicized job listing. This style focuses on matching your qualifications to the advertised requirements of the position.
How to Measure for Blind INstallation
12. Measurements
For agency installation of Venetian window coverings, please follow the guidelines listed in paragraph 13 for taking measurements.
If installation is to be performed by the agency, measurements should be taken by the agency. It should not be necessary to have a contractor take measurements.
Curved Window window treatments
If curved window coverings are desired, a radius of curvature may be given with the +/-r option. If given as +r, The curvature is upward (which is the usual configuration). If the option is given as -r, then the curvature is downward. The radius indicates how far from each slat its effective cylindrical center resides. Each slat will be broken into as many polygons as is necessary to keep the delta changes in angle less than 10 degrees. (Note that this may result in a rather large number of polygons.)
Blind Shading Systems Delivery Timing
Contract Shading Systems will complete delivery within 15 to 30 days after receipt of order.In the event the delivery is not received within the contract delivery period, the contractor may be held in default in accordance with paragraph 1, DEFAULT AND PERFORMANCE BOND in the North Carolina General Contract Terms and Conditions, and the state may procure the articles or services from other sources and hold the contractor responsible for excess cost occasioned thereby. It is important that agencies make the contract administrator aware of delivery problems.
Energy Efficiency Funding
For more than 20 years, DOE’s I&I program has funded more than 500 energy efficient inventions with nearly 25 percent of them reaching the marketplace. Cumulative sales for those products total nearly $710 million.
DOE’s NICE3 program provides funding to state and industry partnerships (large and small business) for projects that demonstrate advances in energy efficiency and clean production technologies like advanced window blind and window shade systems. State and industry partnerships are eligible to receive a one-time grant of up to $525,000. The industrial partner may receive a maximum of $500,000 in federal funding. The non-federal cost share must be at least 50 percent of the total cost of the project.
Blind Measuring Requirements
In situations where the contractor will be installing window treatments and the agency needs assistance in performing measurements, it is the obligation of the contractor to take on-site measurements. Requests for on-site measurements should be forwarded to the contractor in writing, with the using agencys purchase order number, to be confirmed once the actual measurements are complete and the estimate finalized. A purchase order should result in all instances, unless the estimate exceeds budgetary allowances. Any abuse of this service by agencies should be reported to the contract administrator.
All requests for measurements should be made in written form by the using agency. The State will not be responsible for and misunderstandings that results from oral requests.
Cleaning up after Mini Blind Installations
Upon completion of installation, vendor shall clean up and dispose of all debris occasioned by his work. All debris is to be removed from premises and rooms shall be left broom clean. If existing custom blinds are removed, disposal of such should be at the direction of the using agency and if desired, the responsibility of the contractor. Disposal of discount blinds may be off-premises, at the direction of the user.
14.B. Labels
All window blinds sold under this contract shall be labeled inside the headrail with CONTRACTORS name and date of shipment. If the contractor installs custom blinds, the date of installation must be shown in place of the shipment date. Failure to identify discount blinds will result in rejection by Quality Assurance Inspectors and invoices will not be released until such omission is corrected.
15. Quality Acceptance Inspection
Installations in excess of $2500.00 are required to have a Quality Assurance Inspection.
Mini Blind Installation Documentation
The contractor(s) shall provide a copy of all invoices and over per location and a copy of the floor layout to show room numbers and the number of windows with installation.
Invoices shall indicate:
a) Type of window blinds
b)Number of custom blinds at each size
c)Square footage of each blind
d)Total number of discount blinds
e)Total square footage
f)Quantity Discounts
g)Itemized Additional Charges
h)Installation Charge
i)Total Price
Such invoices shall be forwarded to the attention of
Quality Assurance Inspection.Invoices shall be sent on accumulative monthly basis.Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.Upon acceptance by quality assurance inspection to determine compliance with specifications, terms and conditions of this contract, approval for payment of this invoice will be forwarded to the using agency.INVOICES WILL NOT BE PAID BY THE USING AGENCY UNTIL QUALITY ACCEPTANCE HAS BEEN APPROVED.
Mini Blind Installation Inspection Requirements
If re-inspection is required, it is the contractors responsibility to submit an inspection request, in writing, to the Quality Assurance Inspections Office. Such requests may be faxed to 919-715-7058.The minimum charge per blind is based on 12 square feet. Aluminum Slat window blinds price includes all colors, slats and tapes. FOB any destination in NC.Colors: Contact the contractor for color chart.Accessories: Additional charges for accessories apply equally and alike to all base prices offered above. Pricing for each item includes installation of the accessories, where applicable. All agencies are urged to remove existing custom blinds and/or shades and hanging brackets prior to installation by contractor.
Faux Wood Wide Selection of Sizes
Fauz wood window blinds are a beautiful addition to any home. Not only are Faux Wood custom blinds attractive, they can help reduce your heating and air conditioning bills. If you are looking for a change of pace Faux Wood discount blinds can give your home or apartment that designer look and feel.
Basic Blind 23×64 Faux Wood - Natural
Basic Blind 27×64 Faux Wood - Natural
Basic Blind 29×64 Faux Wood - Natural
Basic Blind 30×64 Faux Wood - Natural
Basic Blind 31×64 Faux Wood - Natural
Basic Blind 32×64 Faux Wood - Natural
Basic Blind 34×64 Faux Wood - Natural
Basic Blind 35×64 Faux Wood - Natural
Basic Blind 36×64 Faux Wood - Natural
Basic Blind 34×72 Faux Wood - Natural
Basic Blind 35×72 Faux Wood - Natural
Faux wood window blinds are offered at a number of commercial stores. Many stores offer installation services, but of course you can install them yourself! Look around, there are many attractive deals and discounts available, especially if you are planning on installing faux wood custom blinds throughout your home!
Government Seeking Window Blind Inovation
“25 percent of the energy used to heat and cool buildings goes right out the window,” Secretary of Energy Spencer Abraham said. “The innovative technologies receiving funding today will improve U.S. industrial competitiveness while reducing energy use, helping to make our nation more secure.” Existing custom blinds and shades can be improved to help reduce energy costs.
The Energy Department selected 19 organizations out of 202 proposals to receive funding as part of two DOE programs: Inventions and Innovation (I&I), and the National Industrial Competitiveness through Energy, Environment and Economics (NICE3) initiative.
History of the Mini Blind
A mini blind (mini-blind, miniblind) is a type of non-vertical window blind made of long, narrow slats held together by string and located inside the window. Its slats are not as wide as venetian blind slats.2 A mini blind has more slats than a regular Venetian blind because its slats are narrow. The slats of mini window treatments are less than half the width of regular Venetian window coverings. The slats are opened and closed by rotating a rod or by directly pulling a string. They are raised and lowered by pulling other strings.
window treatments made of narrow, light-weight horizontal wood slats, adjustable to admit or exclude light, were developed in 1794, and called Venetian window coverings. The window treatments were often used instead of window curtains or shutters. In the 1840s, these window coverings were held together by flat strips of cloth instead of by cords perhaps to shade the lift holes and like today they came in various colors.4 In 1966, a new pulley system was invented which afforded great improvement in the control mechanism. 5 Over time, narrower slats became more common, as they were easier to clean and they reduced glare at certain settings and their appearance was pleasing to many. In 1946 Henry Sonnenberg and Joe Hunter developed technology and equipment for the production of lightweight aluminum slats (50 mm) for Venetian window treatments, and by 1979, 25 mm slats were popular.6
#TITLE# Sending a Resume
One Inch Mini Blind Contract
This contract is established to furnish One Inch Mini custom blinds on a periodic basis during the period designated. The contract may be renewed by written agreement of the parties under the same prices, terms and conditions for additional twelve (12)month periods but not beyond December 31, 2007.
Approximately 200 discount blinds will be purchased during the contract period. Sizes will range from 17 x 142 wide and 24 to 126 long. Lift cord and wand placement (left or right) to be available. The customer (KUMC) shall perform their own blind installation.
Invoicing for Mini Blind Installation
The contractor shall invoice at the actual installation cost of the window treatments, per location.The minimum installation charge shall apply only in cases where the installation cost of the window coverings exceeds the minimum installation charge.
*Location is defined as one or more buildings within close proximity to one another requiring installation service. The minimum installation charge is not intended to apply to each building at a single location. When installation can be completed at more than one building, and it is not necessary for the installers equipment to be transported by vehicle between the installation sites, only one minimum installation charge should be applied.
Mini Blind Contract Price Control
There will be no provision in this contract for any increase or reduction in the contract prices for any installation for a state agency or public school without approval from the Division of Purchase and Contract.8. Substitutions
Substitutions are not permitted without prior written approval of this division. Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.
Transportation Charges:
All goods shall be delivered FOB DESTINATION for all orders equal to, or greater, than the minimum order, when shipped to a single destination. Orders for less than the minimum order will be shipped prepaid, with transportation charges added to the invoice as a separate item. Transportation charges levied by the contractor for orders equal to, or greater than the minimum order, when shipped to a single destination, may be cause for removal of the contractor from the contract. In instances where the contractor makes partial shipments of an order to one destination which is equal to, or greater than, the minimum order, all shipments of the order shall be sent FOB DESTINATION with NO additional transportation charges.
Term Contract No. 870A
What is a Mini Blind?
The long horizontal slats are held one above the other by the rungs of ladder cords shaped like a ladder. The lower ends of the legs of the ladder cords are secured to the long rail under the slats. Their upper ends are attached to the drive rod in the housing, the elongated box above the slats. As the drive rod rotates, one leg of each ladder cord moves up while the other moves down, causing the angle of the slats to change. In one design, this rotation is achieved by pushing up or pulling down on a long handle called a tilt wand connected to the drive rod by a lever. Lift cords along the ladder cords are also attached to the rail. They pass through holes in the slats and into the housing above, where they go over pulleys, combine and exit through the cord lock. For safety it’s important that the lock always work. A downward pull on the main lift cord raises the slats by the cords pulling up the rail below the slats. The cord lock holds the main lift cord to keep the slats up until the cord is pulled to release the lock. The safety lock made the cord lock easier to use.
Easy Resumes
Modern technology has added a new twist to preparing resumes andcover letters. The availability of personal computers and laser printers has raised employers expectations of the quality of resumes andcover letters applicants produce. Electronic mail, Internet postings, and software that reads resumes help some employers sort and track hundreds of resumes. Technology has also given cover letter writers greater flexibility; page limits and formatting standards are no longer as rigid as they were several years ago. The only rule is that there are no rules, says Frank Fox, executive director of the Professional Association of Resume Writers. Resume should be error free no typos or spelling mistakes but beyond that, use any format that conveys the information well.
One Inch Mini Blind Contract
This contract is established to furnish One Inch Mini window treatments on a periodic basis during the period designated. The contract may be renewed by written agreement of the parties under the same prices, terms and conditions for additional twelve (12)month periods but not beyond December 31, 2007.
Approximately 200 window coverings will be purchased during the contract period. Sizes will range from 17 x 142 wide and 24 to 126 long. Lift cord and wand placement (left or right) to be available. The customer (KUMC) shall perform their own blind installation.
Mini Blind Contract Price Control
There will be no provision in this contract for any increase or reduction in the contract prices for any installation for a state agency or public school without approval from the Division of Purchase and Contract.8. Substitutions
Substitutions are not permitted without prior written approval of this division. Failure of the contractor to comply with this requirement may result in the removal of the contractor from the contract.
Transportation Charges:
All goods shall be delivered FOB DESTINATION for all orders equal to, or greater, than the minimum order, when shipped to a single destination. Orders for less than the minimum order will be shipped prepaid, with transportation charges added to the invoice as a separate item. Transportation charges levied by the contractor for orders equal to, or greater than the minimum order, when shipped to a single destination, may be cause for removal of the contractor from the contract. In instances where the contractor makes partial shipments of an order to one destination which is equal to, or greater than, the minimum order, all shipments of the order shall be sent FOB DESTINATION with NO additional transportation charges.
Term Contract No. 870A
Cover Letter Points to Consider
Whenever possible, address the cover letter to a specific person by name and title. This requires a minimum of research that will ultimately pay off in more interviews. The only time this may not be possible is when responding to a “blind ad” where there is no way to know the name of the company to research. In this case, send the letter to the title of the appropriate hiring manager, e.g., “Production Manager,” “Maintenance Supervisor,” “Office Manager,” etc. Never use the phrase “To Whom It May Concern.”
What to do if Circumstances prevent Delivery?
If circumstances beyond the control of the contractor result in a late delivery and installation, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator.
Term Contract No. 870A
Cover Letter Structure
Structure the cover letter to reflect your individuality, but avoid appearing too familiar, overbearing, humorous or cute. Keep sentences short and to the point.
Government Seeking Window Blind Inovation
“25 percent of the energy used to heat and cool buildings goes right out the window,” Secretary of Energy Spencer Abraham said. “The innovative technologies receiving funding today will improve U.S. industrial competitiveness while reducing energy use, helping to make our nation more secure.” Existing window treatments and shades can be improved to help reduce energy costs.
The Energy Department selected 19 organizations out of 202 proposals to receive funding as part of two DOE programs: Inventions and Innovation (I&I), and the National Industrial Competitiveness through Energy, Environment and Economics (NICE3) initiative.
Mini window treatments to be Furnished and Installed
If circumstances beyond the control of the contractor result in a late delivery, it is the responsibility and obligation of the contractor to make the details known immediately to the contract administrator. Delivery/Installation: This contract provides for window coverings to be furnished only or furnished and installed. In instances where furnish and install is requested, window treatments are to be delivered and installed within a guaranteed delivery and installation schedule.
The Effective Job Seeker
The effective job seeker will not send the same resume for each new job opportunity. Resumes need to be tailored for each position. Likewise, the same cover letter cannot be used in every situation. It also must be customized for each opportunity. There are a variety of cover letter formats, some of which are described below. Whatever format you use, be sure the letter conforms to acceptable standards for business letters.
Cover Letters
Cover letters and notes should be standard tools in your job search. The thank you letter should follow a standard business letter format while the note may be a simple handwritten note or card. Which to send depends upon the situation and your personal style.